Screws, Studs & Accessories
Browse the full hardware range for distributors, wholesalers, and project procurement teams.
All Thread Rod GB/T 15389-2025 DIN 975 ASME B18.31.3
All-thread rod to GB/T 15389-2025, DIN 975 and ASME B18.31.3; continuous threads, available in carbon, alloy or stainless steel with multiple gra...
Fully Threaded Rod / Threaded Bar DIN 975 GB/T 15389 ASTM A193
Fully threaded rod with continuous thread along the full length. Carbon, alloy or stainless steel; grades 4.8–12.9. Finishes: black oxide, electr...
Double End Stud GB/T 897、GB/T 898、GB/T 899、GB/T 900、GB/T 901 DIN 938、DIN 939、DIN 940
Threaded both-ends stud with central unthreaded shank, carbon or alloy steel in grades 4.8–12.9, available with black oxide, zinc or hot-dip fini...
Black Oxide Double End Stud GB/T 901、GB/T 897~GB/T 900 DIN 938、DIN 939、DIN 940
Double-ended threaded stud with black oxide finish; carbon or alloy steel in grades 4.8–12.9. Listed for GB/T and DIN stud standards used in flan...
Cross flat head knurled self-tapping screw GB/T 845、DIN7981 GB/T 5267.1
Knurled Phillips self-tapping screw in carbon steel for wood, plastic and thin plates. Offered in zinc, color-zinc and black oxide finishes; avai...
Phillips Countersunk Head Self-Tapping Screw GB/T 846 DIN 7982 ASME B18.6.4
Phillips-drive, countersunk self-tapping screws to GB/T 846 / DIN 7982 / ASME B18.6.4. Carbon or stainless steel; zinc plating or black-oxide fin...
Phillips Countersunk Head Self-Tapping Screw GB/T 819.1 DIN 965 ASME B18.6.3
Phillips countersunk head self-tapping screw to GB/T 819.1 and DIN 965, available in carbon or stainless steel with zinc or black-oxide finishes.
Phillips Countersunk Head Machine Screw GB/T 819.1 DIN 965 ASME B18.6.3
Phillips countersunk head machine screw (GB/T 819.1, DIN 965, ASME B18.6.3); carbon or stainless steel, zinc-plated or black oxide; metric and UN...
External Expansion Bolt GB/T 22795 ETAG 001
Wedge-type external expansion bolt for solid concrete, natural stone and dense brickwork. Assembled from bolt, sleeve, wedge cone, washer and nut...
Sleeve Expansion Bolt GB/T 22795-2008 TG
Sleeve expansion bolt to GB/T 22795-2008 TG. Hex bolt, washer, nut and slotted sleeve. Carbon steel or SS304; zinc or hot-dip finish. Sizes M6–M2...
Plastic Expansion Tube JG/T 139 ETAG 020
Plastic expansion tube conforming to JG/T 139 and ETAG 020. PE or nylon construction; expands with a screw to anchor in brick, concrete and gypsu...
Threaded Rod for Wedge Anchors GB/T 15389-2025 DIN 975 ASTM A193
Full-threaded rods for wedge anchors, supplied in carbon/alloy steels (grades 4.8–12.9) or stainless A2-70/A4-70, with multiple finishes and cut...
Expansion Bolt GB/T 22795 ETAG 001
GB/T 22795 ETAG 001 expansion bolt: bolt, sleeve, cone, washer and nut. Expands in solid concrete. Available galvanized carbon steel or stainless...
Internal Expansion Anchor GB/T 22795 ETAG 001
Female internal expansion anchor for solid concrete. Bolt tightening drives a cone to expand the sleeve, producing frictional fixation for equipm...
Mechanical Anchor ETAG 001 GB/T 22795 ASTM F1554
Mechanical expansion anchor for concrete and masonry. Conforms to ETAG 001, GB/T 22795, ASTM F1554. Available in carbon steel or stainless steel.
Chemical Anchor Bolt GB 21655.1 ETAG 001 ACI 355.4
Chemical anchor bolt set with threaded stud, resin capsule, washer and hex nut; bonds without expansion stress. Suited to cracked concrete, stone...
Drop-in Anchor GB/T 22795(NP)-2008 DIN 938 CID A-A-55614
Internal expansion drop-in anchor for solid concrete; flush-mounted sleeve expands via built-in conical plug. Supplied in carbon steel or 304 sta...
Self-Drilling Screw GB/T 15856.1 GB/T 15856.2 DIN 7504
Self-drilling screw per GB/T 15856.1, GB/T 15856.2, DIN 7504 — drill-tip fastener in hex flange, Phillips pan or countersunk heads; multiple mate...
Sleeve Anchor GB/T 22795(TGQ)-2008 DIN 906 / DIN 938 ASTM F1554
Sleeve anchor set with threaded bolt, split expansion sleeve, flat washer and hex nut. Carbon steel or 304/316 stainless; zinc-plated or hot-dip...
Pan Head Self-Drilling Screw DIN 7504 N ASTM C1513
Pan-head self-drilling screw with integrated drill tip (DIN 7504 N / ASTM C1513). No pre-drilling; for steel sheets, purlins and metal roofing co...
Wire Nail GB/T 349-2018 ISO 12570
Low-carbon steel wire nails to GB/T 349-2018 / ISO 12570. Round head, conical point; lengths 16–150 mm. Available bright or electro-galvanized.
1m Threaded Rod GB/T 15389-2025 DIN 975 ISO 8765
1000mm all-thread rod (no head) with chamfered ends. Available in Grade4.8/8.8 carbon or A2(304)/A4(316) stainless, sizes M3–M48 and multiple fin...
Chipboard Screw DIN 7505A GB/T 3098.25
Case-hardened chipboard screw to DIN 7505A / GB/T 3098.25 with countersunk head, sharp point and deep thread for MDF, particleboard and engineere...
Hex Washer Flange Self-Drilling Screw, Self Drilling Fastener
Hex flange-head self-drilling screw with integrated drill tip and flange for one-step fastening into metal sheets; suitable for solar brackets, m...
Slotted Tail Thread Cutting Screw, Type F / Type 25 Thread Cutting Screw
Slotted-tail thread cutting screw that forms internal threads in plastic, hardwood and thin metal; available in Type F / Type 25 forms with vario...
High Strength Hex Head Self Drilling Screw, Hardened Steel
Hardened carbon-steel hex-head self-drilling screw with integrated drill point for direct fastening to steel structures, metal roofing, purlins a...
Polished Common Steel Wire Nail, Construction Iron Nail
Polished common low-carbon steel wire nails with a smooth surface and sharp point for wood packaging, furniture, timber construction and general...
Black Phosphated Drywall Screw
Bugle-head Phillips drywall screw with black phosphate finish. Made from hardened C1022 carbon steel with a sharp point. Coarse thread for wood s...